Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem

Inductive rotation speed monitor NJ30+U1+DW1-1

  • Rotational speed controller
  • 30 mm non-flush
  • Start-up override time = approx. 30 s

Stáhněte si kompletní katalogový list ve formátu PDF:

Výňatek z katalogového listu: Technická data  NJ30+U1+DW1-1

General specifications
Switching element functionPNP NO contact
Frequency range0.1 ... 1 Hz , adjustable
Rated operating distance30 mm
Output polarityDC
Assured operating distance0 ... 24.3 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.85
Nominal ratings
Operating voltage15 ... 60 V DC
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop≤ 2 V
Operating current0 ... 100 mA
No-load supply current≤ 25 mA
Switching state indicatorLED 1: yellow
Damping indicatorLED 2: yellow
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typescrew terminals
Information for connectionA maximum of two conductors with the same core cross-section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPBT
Sensing facePBT
Degree of protectionIP67

Dokumenty: NJ30+U1+DW1-1

Instructions, short instructions, safety informationJazykTyp souboruVelikost souboru
Function description for speed monitorsENGPDF86 KB
Funktionsbeschreibung DrehzahlwächterGERPDF48 KB
Technical information
Installation conditionsENGPDF210 KB
EinbaubedingungenGERPDF210 KB

CAD+CAE: NJ30+U1+DW1-1

CADTyp souboruVelikost souboru
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS247 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP181 KB

Schválení+certifikáty: NJ30+U1+DW1-1

CertificatesČíslo certifikátuTyp souboruVelikost souboru
US CA UL General PurposeE87056LINK---
Europe Pepperl+Fuchs 2004/108/EC (EMC) Declaration of ConformityPF 08 CERT 1262PDF357 KB
US CA CSA1007121 (LR96321-2)PDF101 KB

Související produkty: NJ30+U1+DW1-1

MH 04-2681FMounting aid