Inductive sensor NCN3-F31K-N5-K
- Direct mounting on standard actuators
- Fixed setting
- 2:1 transfer method
- LEDs for switching state of sensor and solenoid valve
- Valve LEDs disconnectable
- ATEX & IECEX certifications
NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Výňatek z katalogového listu: Technická data NCN3-F31K-N5-K
| General specifications | ||
|---|---|---|
| Switching function | 2 x normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 3 mm | |
| Installation | flush mountable | |
| Assured operating distance | 0 ... 2.4 mm | |
| Actual operating distance | 2.7 ... 3.3 mm typ. | |
| Reduction factor rAl | 0.35 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.75 | |
| Reduction factor rSt37 | 1 | |
| Reduction factor rBrass | 0.45 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 3 kHz | |
| Hysteresis | typ. 5 % | |
| Short-circuit protection | yes | |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | |
| Current consumption | ||
| Measuring plate not detected | ≥ 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Time delay before availability | ≤ 1.1 ms | |
| Switching state indicator | LED, yellow | |
| Valve status indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 1470 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Valve circuit | ||
| Voltage | max. 32 V DC | |
| Current | max. 240 mA | |
| Short-circuit protection | no | |
| Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Electromagnetic compatibility | NE 21:2007 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx TUN 17.0021X | |
| Equipment protection level Gb | IECEx TUN 17.0021X | |
| Equipment protection level Mb | IECEx TUN 17.0021X | |
| ATEX approval | ||
| Equipment protection level Ga | TÜV 99 ATEX 1479 X | |
| Equipment protection level Gb | TÜV 99 ATEX 1479 X | |
| Equipment protection level Gc (ic) | PF13CERT2895 X | |
| UL approval | cULus Listed, General Purpose | |
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0456 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection (system side) | Cage tension spring terminals Stripped length 7 mm M20 x 1.5 cable gland usable thread length 11.5 mm screw-in depth max. 11.5 mm |
|
| Core cross section (system side) | 1.5/2.5 mm2 flexible/rigid | |
| Connection (valve side) | Cage tension spring terminals | |
| Core cross section (valve side) | 1.5/2.5 mm2 flexible/rigid | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Tightening torque, fastening screws | 4 Nm ... 5 Nm | |
| Tightening torque, housing screws | 1 Nm | |
| Tightening torque, cable gland | M20 x 1.5 ; max. 7 Nm M12 x 1.5 ; max. 1.5 Nm |
|
| Dimensions | ||
| Height | 35.5 mm | |
| Width | 65 mm | |
| Length | 77.5 mm | |
| Note | LED switch-off | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27273901 |
| ECLASS 12.0 | 27273901 |
| ECLASS 11.0 | 27220501 |
| ECLASS 10.0.1 | 27220501 |
| ECLASS 9.0 | 27220501 |
| ECLASS 8.0 | 27220501 |
| ECLASS 5.1 | 27220501 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NCN3-F31K-N5-K
Datasheet: NCN3-F31K-N5-K
| Datasheet | Typ souboru | Velikost souboru |
|---|---|---|
| Datasheet NCN3-F31K-N5-K | 890 KB | |
| Datasheet NCN3-F31K-N5-K | 883 KB | |
| Fiche de données NCN3-F31K-N5-K | 887 KB | |
| Datenblatt NCN3-F31K-N5-K | 885 KB | |
| Scheda tecnica NCN3-F31K-N5-K | 888 KB | |
| Datasheet NCN3-F31K-N5-K | 889 KB | |
| Folha de dados NCN3-F31K-N5-K | 884 KB | |
| Hoja de datos NCN3-F31K-N5-K | 887 KB | |
| Datasheet NCN3-F31K-N5-K | 899 KB |
Documents: NCN3-F31K-N5-K
| Instruction manuals | Typ souboru | Velikost souboru |
|---|---|---|
| Инструкции | 196 KB | |
| Návod k poużití | 187 KB | |
| Instruktions manual | 185 KB | |
| Instruction manual | 187 KB | |
| Kasutusjuhend | 180 KB | |
| Käyttöohje | 179 KB | |
| Manuel d'instructions | 192 KB | |
| Betriebsanleitung | 188 KB | |
| Οδηγίες χρήσης | 199 KB | |
| Handleiding | 188 KB | |
| Instruction manual / Betriebsanleitung | 184 KB | |
| Használati útmutató | 190 KB | |
| Manuale di istruzioni | 189 KB | |
| Lietošanas pamācība | 186 KB | |
| Instrukciju vadovas | 187 KB | |
| Instrukcja obsługi | 189 KB | |
| Manual de instruções | 191 KB | |
| Manual de utilizare | 191 KB | |
| Návod na poużitie | 188 KB | |
| Navodila za uporabo | 184 KB | |
| Manual de instrucciones | 191 KB | |
| Manual | 184 KB |
CAD+CAE: NCN3-F31K-N5-K
| CAD | Typ souboru | Velikost souboru |
|---|---|---|
| CAD Portal / CAD Portal | LINK | --- |
| CAD-files 3-D / CAD-Dateien 3-D | STP | 989 KB |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | EDZ | 271 KB |
Approvals+Certificates: NCN3-F31K-N5-K
| Certificates | Typ souboru | Velikost souboru |
|---|---|---|
| Canada USA UL Hazardous Location | 474 KB | |
| Canada USA UL Ordinary Location | 491 KB | |
| EU Pepperl+Fuchs Certificate Ex ic ATEX Category 3 G | 123 KB | |
| EU TUV Nord ATEX ia 2G, 1G, 1D s. certificate | 662 KB | |
| Worldwide TUV Nord IECEx ia | LINK | --- |
| Control Drawings | ||
| Control drawing UL / Control drawing UL | 378 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1232 KB | |
| UK Declaration of Conformity (P+F) | 1229 KB |
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
Indukční snímače VariKont s technologií aktivního stínění poskytují dlouhé spínací vzdálenosti bez ohledu na instalační situaci a okolní materiál. Profitujte z jednoduššího návrhu zařízení a snížených nákladů.
Vzhledem k tomu, že indukční bezpečnostní senzory SIL 2 / PL d nemají pásmo necitlivosti, může přenos dat probíhat bez zachování jakékoli minimální vzdálenosti mezi senzorem a cílem. Seznamte se s optimalizovaným portfoliem pro náročná prostředí.
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.